Rockhammer RH-200
Rockhammer RH-200 clears bridging, sticking and blockages in steel bunkers, silos and chutes: up to 280 J, 7 impacts per second, welded on where it matters.
Where it is used
Large steel bunkers, silos, transfer chutes and conveyor troughs with heavy bulk cargo: ore, coal, concentrates.
Technical data
| Parameter | Value |
|---|---|
| Impact energy | up to 280 J |
| Working pressure | 7 bar |
| Air consumption (per unit) | 2.5 m³/min |
| Impact rate | 7 impacts per second |
| Power supply | 230 V |
| Power consumption | up to 160 W |
| Mass | 70 kg |
| Impact point | Bunker / silo / chute wall |
| Suitable structures | Steel bunkers, silos, transfer chutes and conveyor troughs (not concrete silos) |
| Installation | Welded to the structure at critical points |
| Control | 32 preset programs; blockage sensor input; up to 2 units per control box |
| Units per control box | Up to 2 |
| Working temperature | Standard −30…+40 °C; low-temperature version down to −40 °C (special oil, dried air) |
| Warranty | 12 months |
| Commercial status | Series production |
Honest limitations
The RH-200 mounts on steel structures only — not on concrete silos. Because of its power we always assess the structure’s strength and wall thickness before installation.
Request a quote
Tell us your material, wagon or hopper type and the problem — an engineer replies within 2 working days.